FEATURES
• Stainless steel construction. Complete inspection before delivery. Suitable for industrial and commercial uses • Start working once installed, cost-effective type.
SPECIFICATION
• Pressure: 150-220 PSI • Removing rate: >97% (organic substance 99.9% Acolloid, bacteria above 99.9%, heat source above 99.9%) • Requiring rate: 50%~75%
RO Raw Water Treatment
| No. | ITEM | DESCRIPTION | |
| 1 | Booster Pump | A. Type: TPH2T4K B. Brand: Walrus C. Capacities: 0.8 H.P 3ψ*380V*50HZ D. Material: FC |
PC |
| 2 | Automatic Multi-Sand Filter System | A. Type: SS-80L B. Filter: Quartz Sand 80L 1) 3-step regeneration (backwash-rinse service) 2) 7 days recycle regeneration Regeneration Signal #263 D. Tank Material: FRP E. Tank Body Size: 13" * 54"H, Piping: 1" |
SET |
| 3 | Automatic Active Carbon Filter System | A. Type: AC-80L B. Filter: Active Carbon 80L 1) 3-step regeneration (backwash-rinse service) 2) 7 days recycle regeneration Regeneration #263 D. Tank Material: FRP E. Tank Body Size: 13" * 54"H, Piping: 1" |
SET |
| 4 | Automatic Softener Filtration | A. Type: SD-80L B. Filter: Cation Ion Exchange 80L 1) 5-step regeneration (backwash-rinse service) 2) 7 day recycle regeneration Regeneration Signal #268 D. Tank Material: FRP E. Tank Body Size: 13" * 54"H, Piping: 1" F. Brine Tank: BT-1435 |
SET |
| 5 | RO Water System 500Litres/Hour | A. Type: RO-3000H-YT B. Capacities: 3000GAL/D 3 Ø *220/380V＊60HZ 3HP C. Pressure Vessel: SUS304 4040*2 RO Membrane: GE AG-4040FF *2PCS D. High Pressure Pump: SUS304 Standing E. High Pressure Pipe: XLTE-AL-XLTE F. Low Pressure Pipe: SCH80PVC G. System Controller: Micro-Computer 1) Conductivity: PPM (Water Quality) 2) Automatic Control: Flush, Water Full 3) Overload Protect 4) Control System stop while regeneration H. PPM.us/cm.KW/cm (NIDDLE TYPE) Frame Material: SUS Electrolyze I. Prefilter: 20 * 5u * 1PC |
SET |
| 6 | Stainless Frame | Stainless Frame All System Connect Pipe And Wire SCH80 PVC |
SET |
Sea Water Treatment
| STEP | NAME | DESCRIPTION | QTY |
| 1 | Dosage Pump System | The dosage injection pump controls different elements in the feed water or produced water of the reverse osmosis plant. These dosage pumps include functions such as the stroke length and percentage rate and are thermally protected with auto reset. A. Type: LMI B. Motor: 50W x 220V x 60Hz x 1ø C. Application: Sulphur Acid, Sodium Sulphate D. Solution Tank: Chemical Storage Tank, 100L x 3 PCS E. Accessories: Individual Low Level Floats |
3 EA |
| 2 | Prefilter | A. Housing: 20", PE B. Cartridge: 20", 5 Micron, Polypropylene C. Qty of Cartridges: 2 PCS D. Working Pressure: 6 BAR E. Accessories: Piping Connection |
1 EA |
| 3 | Carbon Filter | A. Housing: 20", PE B. Cartridge: 20", GAC Carbon (T33) C. Qty of Cartridges: 2 PCS D. Working Pressure: 6 BAR E. Accessories: Piping Connection |
1 EA |
| 4 | R.O. Sea-Water Treatment Plant | A. Raw Water: As Physical Analysis B. Hydraulic Data of Plant: a. Total Raw Water Required: 1900 LPH b. Total Produced Water: 480 LPH c. Total Drain(Reject) Water: 1420 LPH d. Recovery: 25% e. Feed Pressure: 40 PSL C. Produced Water: a. TDS: 500 PPM Below |
|
| 4-1 | Frame | This system is fully skid mounted on heavy-duty stainless steel frame for maximum corrosion resistance and durability. Except for the high pressure pump that will be supplied in SUS-304. |
1 EA |
| 4-2 | SW-RO HP Pump & Motor | A. High Pressure Plunger Pump: Heavy-duty & corrosion resistant material a. Brand: Grundfos or other equivalent b. Fluid End: Stainless steel c. In/Out: 1" (BSP-F) * 1/2" (BSPF) d. Capacity: 1900 LPH, 1000 PSI e. QTY: 1 Set B. High Pressure Motor: Is for heavy-duty industrial application. This motor is designed to operate 24 hours per day a. Brand: Grundfos or other equivalent b. High Pressure: 5.5KW x 380V (415) x 50Hz x 3ø c. QTY: 1 Set |
1 EA |
| 4-3 | RO Membrane | The reverse osmosis membranes used in this application are spiral wound cellulose acetate blend membrane. A. Type: Spiral Wound, RE 4040 SR (CSM) B. Recovery: 25% C. Approximate Operating Pressure: 1000 PSI D. QTY: 5 PCS |
5 EA |
| 4-4 | Pressure Vessels (Membrane Housing) | Heavy-duty reverse osmosis pressure vessel housings are constructed in fiberglass. A. Brand: Wavecyber B. Model: 1000 PSI/End Port C. Sample Permeate Ports: Will be installed in each reverse osmosis pressure vessel to allow evalation of the produced water quality D. QTY: 5 PCS |
5 EA |
| 4-5 | Flow Meter | The flowmeter are panel mounted on a main control panel. The system will read "Water flow rate" with a paddle wheel for accuracy, and sends the signal through a magnetic induced sensor. A. Produced Water Flow Meter: a. Brand: +GF+Signet b. Model: 8550 Series c. QTY: 1 PCS B. Drain Water Flow Meter: a. Brand: +GF+Signet b. Model: 8550 Series c. QTY: 1 PCS |
2 EA |
| 4-6 | Pressure Gauge | Stainless steel 4" diameter liquid filled pressure gauges mounted on main control panel for maximum visibility. A total of 4 pressure gauges will be provided. A. In: 0~20 KM/CM2 B. Out: 0-100 KM/CM2 |
4 EA |
| 4-7 | High Pressure Regular Valve | Heavy-duty stainless steel pressure regulator. Constructed in 316L stainless steel. This regulator will allow the operator to adjust the backpressure in the reverse osmosis membranes. |
1 EA |
| 4-8 | Raw Water Actuator Valve | The raw water inlet actuator valve will activate closer after every shut down for the reverse osmosis plant. This will secure zero feedwater flow into the reverse osmosis plant. A. Brand: Sunyeh or other equivent B. QTY: 1 PCS |
1 EA |
| 4-9 | Interalpipings, Fittings, Cabling | A. Low Pressure Piping and Valves All low pressure piping and valves will be supplied in rigid PVC schedule 80 and flexible re-enforced plastic polyethylene tubing. B. Stainless Steel Piping Complete stainless steel piping on the high pressure side of the reverse osmosis plant. |
1 EA |
| 5 | Flushing/Cleaning Unit | The flushing/cleaning device is including level switch and dry run protection system start automatically when the plant shuts down. The membrane will be flushed by the treated water. A. Tank: PE, 250 Ltr Capacity B. Pump: 1M3/HR, 28M C. Motor: 450W x 380V x 3ø x 50Hz D. Material: Stainless steel 316 |
1 EA |
| 6 | Switch and Control Panek | A. Construction: Solid sheet steel with rod locking device, completely mounted on assembly plate B. Accessories: a. Main Circuit Breaker b. Control circuit booster and high pressure pump, isolating transformer c. Overload Relay d. Shutdown Circuit For: Dry run/Motor Overload e. Hand Off Auto Selector Swtich f. Plant Running Indicating Lamp g. Failure Detection System & Alarm |
1 EA |
| ** | Internal Piping, Fittings, Cabling | (Consisting of all neccessary piping, fitting, cabling within the equipments in the RO water treatment plantroom building) A. Low Pressure Piping: SCH-80 UPVC B. High Pressure Piping: Stainless steel 316 |
** |
| NOTE: |
|
| Power | 380V x 50HZ x 5.5KW x 3ø |
| Location | 2.5M x 1.5M x 2.2M(H) |
| Installation Charge | The buyer shall be responsiblee for the round trip ticket, food, accomodation, transportation expenses of engineers as well as should pay the rate US$150 per person per day. |
| Installation Period | 5 Days by 1 Engineer |
| Guarantee | The equipment will be guaranteed for a period of one year from the date of original installation against failure due to faulty workmanship under conditions of normal use and service. |
| Validity | 30 Days |
